The opener range we fit most. Every current Merlin unit includes myQ phone control as standard, with Security+ rolling code, infrared safety beams and battery backup on the models that carry it.

It comes down to the door type and its weight. A roller door takes the SilentDrive Elite. A standard sectional door takes the Commander Elite. A heavy, wide or insulated sectional takes the Commander Ultimate, which adds a belt drive and a battery backup system. Genuinely heavy-duty doors take the Commander Extreme. We match the drive to the measured weight rather than to a price point.
Every current Merlin opener includes myQ, so you can open, close and check the door from your phone and get an alert when it moves. No extra module to buy. See smart control.
A new encrypted code on every press, so a remote cannot be cloned from the kerb. The keypad and wall button run on the same system, and extra remotes pair in under a minute.
Infrared safety beams across the opening and an auto-reverse on contact, set to the force your door actually needs. Both are tested with you there before we hand it over.
Includes the opener, the rail, two remotes, a wireless wall button, myQ set up on your phone, infrared safety beams, force and travel tuning to your door, and removal and disposal of the old motor. We check the door's balance and spring condition first, because a new opener fitted to an unbalanced door just inherits the problem. For indicative market ranges, see the automatic opener buyer's guide.

Four units cover almost every residential job in Auckland. The deciding factors are the door type, the finished weight of the door, and whether the garage is under a living area where drive noise matters.
A belt drive is the quietest option and the one to pick where there is a bedroom or living space above the garage. A chain drive costs less and handles weight well, but you hear it through the floor. We will tell you which side of that trade-off your garage sits on.
Every install comes with two remotes and a wireless wall button as standard. Beyond that, the useful additions are an external keypad and the myQ app, which between them mean nobody in the house needs to carry a remote at all.
A code pad mounted outside the door. Good for kids home from school, tradespeople you want in once, or anyone who locks themselves out. Codes can be changed or removed whenever you like.
Mounts inside the garage with no wiring to run, so it goes where it is convenient rather than where the cable reaches. Most include a light control and a lock-out for when you are away.
myQ shows whether the door is open or closed from anywhere and sends an alert when it moves. The most-used feature by a distance is checking at 10pm whether it was left open.
Extra remotes pair in under a minute and we leave you knowing how to do it, rather than making it a callout. If you have lost a remote, re-pairing clears the old one from the opener's memory so it stops working.
An opener is only as good as the door it is bolted to. Fitting a new motor to a door that is out of balance moves the load onto the motor, which is how a two-year-old opener ends up failing. So the door comes first.
The whole job is usually a couple of hours on an existing door. We take the old motor away. For what automation involves more broadly, see openers and motors.
Free on-site measure and quote anywhere in Auckland. We will tell you which model your door needs and why.
021 764 609