Lighter than steel and it does not rust. On a coastal Auckland site that second point is the whole argument, and it is why aluminium turns up on so many houses within a few streets of the water.

Steel for most inland Auckland houses, because it costs less and dents less. Aluminium where salt air is the problem, where the door is very wide, or where you want a glazed or architectural look. Aluminium will not rust and is lighter on the springs and opener; steel is harder and cheaper. That is the whole trade-off, and the site usually decides it.
Aluminium corrodes differently from steel: it oxidises on the surface and stops, rather than rusting through. Near the sea that is the difference between a door that ages and one that fails.
Less weight means less work for the springs and the opener on every cycle, which generally means a longer life from both.
Any powder-coat colour, or an anodised finish that will not chalk. Anodising holds up better on a hard coastal elevation.
Lower weight makes aluminium easier to justify on a very wide double, where a steel door of the same size starts getting heavy.
The frame suits glass or acrylic infills, which is why full-view doors are almost always aluminium. Glass doors →
The honest downside. Aluminium dents more easily. If the door takes bikes, balls and reversing trailers, steel is the tougher option.
Includes the door, frame, hardware, springs sized to the finished weight, installation and removal of the old door. Request a quote.

Aluminium is powdercoated rather than painted, so the colour is baked into the surface and does not flake the way paint on steel eventually can. It is a genuinely low-maintenance door: rinse it with fresh water a few times a year, more often near the coast. It will not rust, and warping is not the risk it is with a timber face.
Any colour in the powdercoat range, matched to your joinery. An architect specifying a tone for the whole elevation can have the door finished to it rather than close to it.
Aluminium is softer than steel, so a hard knock can leave a dent where steel would spring back. On a panel door a single damaged panel can be replaced rather than the whole door.
Lighter than steel for the same door type, so springs and opener work less and the door runs quieter than a steel panel or a roller curtain. Headroom and track are still sized to the finished weight at the measure.
Free measure and quote anywhere in Auckland.
021 764 609